Welcome Guest Search | Active Topics |

Tag as favorite
Electricity
Options
Previous Topic Next Topic
Lina_5913
#1 Posted : Monday, August 02, 2021 4:23:29 PM
Rank: Newbie

Groups: Registered
Joined: 6/5/2021
Posts: 6

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
Hello,

I was wondering if you would be able to explain why in a resistance series, the current is the same but the voltage changes and vice versa for a parallel?

Also can you explain why in a capacitance series, charge stays the same but voltage changes and vice versa for parallel capacitance?

Thank you very much,
Lina
Back to top
Report?
INSTR_Calla_139
#2 Posted : Monday, August 02, 2021 5:35:19 PM
Rank: Member

Groups: Registered
Joined: 6/8/2021
Posts: 13

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
Hello Lina

In a resistance series there is only one path for the current to flow. Therefore the current over all the resistors will be the same. In this case, the voltage will drop the most over the largest resistor. However when it is set up in parallel, there are multiple ways for the current to flow. Therefore current will flow in the easiest path which means it will not always be divided up evenly. In this case the voltage drop will stay the same.

The same idea applies for capacitance series. In this case the current all has to flow on the same path therefore the charge will stay the same. For Parallel the current has options of which ways it will flow so the charge does not have to stay the same.
Back to top
Report?
Users browsing this topic
Guest
Tag as favorite
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Clean Slate theme by Jaben Cargman (Tiny Gecko)
Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.096 seconds.