Welcome Guest Search | Active Topics |

Tag as favorite
EK Study Guide Lecture 2 Questions
Janelle_5719
#1 Posted : Tuesday, June 02, 2020 11:14:40 PM
Rank: Newbie

Groups: Registered
Joined: 5/18/2020
Posts: 8

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
- Question #31: How do we know what the distance from the rope to the end of the board on the side opposite to the weight is? We are not given a total length of the board or what that value is. Also when we are finding the mass of the board is part of that mass not also contributing to the torque on the side with the weight?

- Question #35: How would the two objects rise to the same height? If the same force is being exerted on them by the spring wouldn't the more massive object not accelerate as much and therefore it would reach a lower height than the less massive object? Even when I use 1/2mV^2 =mgh I still think it would reach a lower height. Why am I wrong?

- Question #42: Why does having the pivot closer to the point mean that the tension changes at that point?
INSTR_Kailey_109
#2 Posted : Thursday, June 04, 2020 10:02:51 PM
Rank: Advanced Member

Groups: Registered
Joined: 6/4/2020
Posts: 31

Thanks: 0 times
Was thanked: 0 time(s) in 0 post(s)
Hello! For question #31, the question says “meter stick” so the total length of the rod is 1m. With the left side of the rod (relative to the pivot point) being 20 cm, the right side must be 80 cm.


In question #42, the pulley acts as a modified lever due to the pivot points being off-center. This causes a difference in tension.

We'll loop back to question #35 shortly.
Users browsing this topic
Guest
Tag as favorite
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Clean Slate theme by Jaben Cargman (Tiny Gecko)
Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.076 seconds.